BendixKing SG 465 System EFS 40/50 - Manual (Page 206)

Fault Annunciations
w
ANT FLT
Displayed when the measured
antenna tilt does not match the
requested tilt angle.
w
TX FLT
Displayed when a fault is detect-
ed in the radar transmitter.
w
R A N G E
Displayed when the pilot has
selected the 1000 mile range on
the EFIS. The radar is unable to
operate at this range and is
placed in standby.
o
Installation with an RDS 81,
RDS 82, RDS 82VP or RDR 2000
with EFS software 07 or later,
“RANGE” will annunciate when
the 5 NM, 320 NM or 1000 NM
range is selected.
o
Installation with software 06
“WX FLT” (weather fault) will
annunciate when the 5 NM or
320 NM range is selected.
These annunciations alert the
pilot of a range mismatch
because the RDS 81, RDS 82
and RDS 82VP do not support
these radar ranges.
w
STB OFF
Displayed when stab off has
been selected or when the stabi-
lization reference is not present
at the radar.
w
W A I T
Displayed when in VP mode and
one of the TRACK buttons is
pressed, indicating the radar will
perform the desired slicing func-
tion as soon as the antenna
returns to the last selected profil-
ing azimuth angle.
CUSTOM DISPLAY
FAILURE ANNUNCIATIONS
DOPPLER/CABLE
w
EXTERNAL SYSTEM
F A I L U R E S
FMS Warning
In the upper right hand corner of
the display, a RED X will be
drawn through a cyan FMS if the
FMS has failed or is not supply-
ing the EFS 40/50 with valid
computed data.
Autopilot Warning
In the upper left hand corner of
the display, a RED X will be
drawn through a red COUPLER if
the autopilot or coupler has failed
or is not supplying the EFS 4 0 / 5 0
with valid computed data.
N o t e : A configuration option
selectable at the time of instal -
lation and certification allows
for installations of the Doppler
and Cable mode without inter -
face to an autopilot or coupler.
If this option is selected the
COUPLER warning will not be
annunciated.
6.5 Issued 8/10 SW 04/05/06/07/08/09/10/11/12/13/14/15/16
Section 6mp 9/9/10 3:57 AM Page 6.5