BendixKing SG 465 System EFS 40/50 - Manual (Page 86)

MFD Operation
Those push buttons which have
common operation between the
MFD and EHSI control panels,
E D 461, CP 467 and CP 4 6 8 ,
will function as defined in the
section 2.1, EHSI Operation
unless otherwise noted in this
section. For detailed operational
information on those buttons
please refer section 2.1.
COURSE SELECT
KNOB/BUTTON
The course select knob will func-
tion identical to, but independent
of the one on the EHSI control
panel, ED 461, CP 467 or CP
468, when the CRS SEL button
is activated. This provides inde-
pendent selection of course on
the MFD referenced to the same
or a different nav sensor.
If the CRS SEL button is not acti-
vated, the course select knob on
the CP 469 will not be active. In
this mode the MFD will obtain
selected course data from the
pilot EHSI control panel. In this
mode the course on the EHSI
and MFD will be synchronized,
unless the selected sensor on
the MFD is a LNAV providing
D T K .
When the MFD course select
knob is not active, a bar the color
of the CRS annunciator will be
placed above it. This will alert the
pilot that the MFD CRS knob is
not active and is referenced to
the pilot
’ s EHSI selected course.
Example: C R S 1 3 5
HSI BUTTON
Will function identical to, but inde-
pendent of, the one on the ED
461, CP 467 or CP 468. Begin-
ning with software 07, an addi-
tional "Plan View" display format
can be configured for presenta-
tion on the MFD. When config-
ured, this display format is added
to the end of the HSI button
selection list provided in section
2 . 1 .
Refer to section 2.1 EHSI OPER-
ATION for detailed information.
ARC BUTTON
Will function similar to, but inde-
pendent of, the one on the ED
461, CP 467 or CP 468. The
MFD ARC button will allow the
selection of an optional radar
only MFD display. This display
will not contain navigation or map
data and is added to the end of
the ARC button selection list pro-
vided in section 2.1.
NAV BUTTON
The NAV button may be config-
ured at the time of installation
and certification to operate in one
of two methods.
2.4.2 Issued 8/10 SW 04/05/06/07/08/09/10/11/12/13/14/15/16
CONTROL PANEL BUTTON OPERATIONS
TST REF CRS SEL
CRS
BRT
ENT C-L TCS ARC HSI NAV
1-2
TST REF CRS SEL
CRS
BRT
ENT C-L TCS ARC HSI NAV
1-2
Section 2.4mp 9/8/10 7:49 PM Page 2.4.2