CANOGA PERKINS 2240 Fiber Optic Modem - Manual (Page 103)

2240 Fiber Optic Modem
103
Power Requirement:
Standalone 115 VAC +10% @ 0.22 Amps
115/230 VAC + 10% switchable
@ 0.11 Amps ,47 to 63 Hz
-48VDC; 0.5 Amps (max)
Rack Mount PC Card 18 VAC +10% @ 1.1 Amps per board
50 to 64 Hz
7.3 Indicators and Controls
Indicators (6): Tx/Rx Data Activity; Local / Remote Sync;
Loopback Active; Power On;
Power Alarms (2201 Rack Only)
Controls (10): Local / Remote Loopback Slide Switch;
Operating Mode DIP Switch; Data Rate DIP
Switch; Hi / Low Optic Power DIP Switch
7.4 Physical / Environmental:
Dimensions:
2240-S Standalone 12.8" L x 8.5" W x 2.5" H
PC Card 12.5" L x 7.8" W x 1.06" H
Unit Weights [shipping]:
2240-S Standalone 3.63 lbs
PC Card 0.9 lbs
Operating Environment:
Temperature 0 to 50 0 C
Humidity 0 to 95% (non-condensing)