M configuration switch settings – CANOGA PERKINS 2240 Fiber Optic Modem User Manual
Page 72
Advertising
72
Canoga Perkins
Table 4-M.
Configuration
Switch Settings
There are three different types of interface connectors, and each is identified by the
number at the end of the interface code of the order number (refer to Table 4-N).
The connectors are female DA-15 (4B1); four-position terminal block (4B2); or two
female BNCs (4B3). Figure 4-2 shows how the input and output pairs are wired to
these connectors.
Advertising