6port information, Port information -15, Figure 19. ports information screen -15 – CANOGA PERKINS 9135 SNMP Managed 10/100/1000 Ethernet Switch User Manual
Page 31: 6 port information
EdgeAccess Universal Chassis System
Model 9135 10/100/1000
3-15
3.6
Port Information
The various Port Information and Statistics screens shows status for the ports on the 9135.
•
Ports information follows the front panel LEDs; see Figure 19.
•
Port n Statistics shows standard information about the data flow through one port and provides
options to update parameters; see Figure 20.
•
Single Port Statistics shows values for hardware and software parameters for one port; see
Figure 21.
•
All Ports Statistics shows standard information about the data flow through the 9135; see
Figure 22.
To access the various port information screens, follow these steps:
1. From the Main menu, type
3
, Port Information and press <Enter>.
2. From the Port Information screen, type
1
,
2
, or
3
, and press <Enter>.
Ports
9100-330
9100-330
___________________________________________________________________
|
|
|
|
| Tx Lnk Col Aut | Tx Lnk Col Llf |
|
| *
*
o
o
| *
*
o
o
|
|
|
|
|
|
| *
*
o
*
| o
*
o
o
|
|
| Rx Fdx Par 100 | Rx Fdx Par Lle |
|
|________________|________________|_________________________________|
Port 1
Port 2
1. Port 1 Information
2. Port 2 Information
3. All Ports Statistics
4. Main Menu
Figure 19. Ports Information Screen
You can update parameters for either port on the Port n Information screen. The Hw/Sw Control
option sets the port functions to either follow the SW1 settings (hardware control) or to ignore the
SW1 settings and follow the values set on this screen (software control). For details about SW1, see
Chapter 2. See Figure 20.