CANOGA PERKINS 9135 SNMP Managed 10/100/1000 Ethernet Switch - Manual (Page 43)

EdgeAccess Universal Chassis System
Model 9135 10/100/1000 5-1
Chapter 5
Specifications
5.1 Switch Specifications
Switching Characteristics
Bridging: Per IEEE 802.1d
Spanning Tree
Address Table: Maximum 1000 MAC addresses entry
Forwarding Rate: 148,800 packets-per-second maximum per port
Buffer Memory: 1 MB per port
Management Board Characteristics
In-Band Support: SNMP, TELNET, TFTP, FTP, BOOTP
MIBs Supported: MIB II, Bridge MIB, Private MIB (contains RMON group 1 counters)
Terminal Port: EIA-232, DTE, DE-9 female connector, VT100 compatible
SLIP (Modem) Port: EIA-232, DCE, DE-9 male connector, Modem control or SLIP
Software Download: TFTP
Network IP Configuration: BOOTP or User Entry
Alarms
General: Per port relay activated by:
• Unit Power Fail
• Link Loss
• Remote Fault
Relay Per Port: Three dry contacts (common, normally open, normally closed) on rear
panel
Contact current: 30 VDC Max., 1A
Screw-terminal strips
Physical/Environmental
Dimensions: 17.25"W x 13.375"L x 1.75"H [1U] (438 mm x 340 mm x 44 mm)
Weight: 5.5 lbs (2.5 kg)
Operating Temperature: 32° to 122° F (0° C - 50°C)
Humidity: Up to 90% noncondensing
Power: AC: 85-260 VAC, 50/60 Hz
DC: 36 to 72 VDC