CANOGA PERKINS 6703 CWDM Transponder - Manual (Page 16)

EdgeAccess Universal Chassis System
3.4 System Configuration Menu
The System Configuration menu provides access to most configuration options for the 6703. To
access the System Configuration menu, follow theses steps:
1. From the Main Menu, type 1 , "System Configuration," and press <Enter>. The System
Configuration menu appears.
2. To return to the Main menu, press <Esc>.
SYSTEM CONFIGURATION
1) Hardware Description
2) Trap Configuration
3) Alarm Output Configuration
4) SNMP configuration
Figure 5. System Configuration Menu
Table 2. System Configuration Option Definitions
Selection Description
1) Hardware Description Shows the model, type, revision and serial numbers; Alarm,
power supply, and fan status; and interface types; no
configurable options
2) Trap Configuration Shows the trap configuration; you can enable/disable traps to
the Network Manager
3) Alarm Output Configuration Shows the alarm configuration; you can set each alarm
parameter to Major, Minor or Off
4) SNMP Configuration Shows the SNMP parameters if a Network Manager is in use;
you can set options.
3.4.1 Hardware Description/Interface Description Screen
The Hardware Description screen shows the module type, with model and revision numbers, and the
power supply status. The Interface Description screen shows parameters for both optical interfaces.
Use this information when troubleshooting, such as tracking down an error in a data link or the
configuration. To view the Hardware Configuration screen, follow these steps:
1. From the System Configuration menu, type 1 , "Hardware Description," and press <Enter>. The
Hardware Description report appears; see Figure 6.
2. To view the Interface Description report, press <Tab>; see Figure 7.
3. To return to the System Configuration menu, press <Esc>.
CWDM Transponder Model 6703 3-4