CANOGA PERKINS 9145 Network Interface Device - Manual (Page 27)

9145 Network Interface Device 3-7
Following is a brief description of the Main Screen Menu items
System Configuration
View and set values for the system information and communications parameters.
1. IP/SNMP Agent Configuration
The Management IP and Auxiliary IP Address are for managing and
conducting performance testing on a TCP/IP network. Enter the
Management IP Address in this field. When NPA Option is active, this screen
also configures the Test IP Address fields. Please see NPA Manual for
details on Test IP Address configuration.
2. Trap Configuration
This defines the handling of various alarm events. You can log and/or send
the event, as well as ignore it.
3. Security Configuration
This configures user and SNMP security for the 9145.
4. Account Information
This managed user access to the 9145 including privileges, passwords and
access methods.
5. System Information
This allows the addition of administrative information about the 9145 and
circuit information such as the 9145’s name, contact, location, customer,
circuit, equipment codes and CLIE information.
6. Radius Client Information
This configures the 9145 for RADIUS Authentication of user. The 9145
implements Radius Passthru for user authentication by a RADIUS Server.
7. SNTP Client Configuration
This configures the 9145 to use a primary and secondary SNTP Server for
setting date and time.
8. SYSLOG Client Configuration
This configures the 9145 to send SYSLOG messages to a SYSLOG Server
for collections and dissemination.
9. Hardware Information
This displays information about the 9145 including full model numbers of the
9145 and its Interface modules, hardware revision levels and serial numbers.
When the 9145 is connected to a remote 9145, L351 or L357 and SideBand
Management Channel is enabled, information about the remote device is also
displayed.