CANOGA PERKINS 9145 Network Interface Device User Manual
Page 45
Advertising
![background image](/manuals/651378/45/background.png)
9145 Network Interface Device
3-25
Table 3 – T rap Configuration Options
Trap
When enabled, sends a Trap if. . .
Local/User Port Link, Remote User
Port Link, or Extension Port Link
The link went down and came back up
Remote Fault Received
A port receives an RMTF
Link Loss Forwarding
A port loses a received link and transmits
notification to the next port
Cold Start
The 9145 is reset by a power failure or forced reset
Authentication
An unauthorized host attempts SNMP access
Side Band Mgmt Channel
SBMC is lost or back online
Diagnostics
Loopback is enabled or disabled
Configuration
When the 9145’s remote unit has an incompatible
firmware
Power Supply
When the power supply is failing
SFP
An SFP change occurs
Advertising