CANOGA PERKINS 9145 Network Interface Device - Manual (Page 60)

9145 Network Interface Device 3-40
Trap Destination Configuration
You can configure and display the destinations for Trap messages. In addition to setting the
host address and port, you can set the security level for the notification, then set values for
various security related parameters. To access and update the Trap Notification/Destination
Table, follow these steps:
1. From the System Configuration Menu type [ 1] , "IP/SNMP Agent Configuration," and press
<Enter>, then type [ 3] , "Trap Table," and press <Enter>. The Trap/Notification Destination
Table screen appears.
Canoga Perkins Corp. Ethernet Network Interface Device 29-Nov-2006
Model 9145-5 V05.00 F96 9145 D 11:40:42
---------------------TRAP/NOTIFICATION DESTINATION TABLE------------------------
Managing Trap Username/ Security
Host Port Type Community Level
172.016.002.040 162 V1-Trap public N/A
Select [(A)dd, (D)elete, (E)dit, (M)ore]:
------------------------------------Messages------------------------------------