CANOGA PERKINS 9145 Network Interface Device - Manual (Page 41)

9145 Network Interface Device 3-21
• Sntp Servers Configuration:
Sets IP address and operating parameters for 2 servers
• IP Address: Set the address for the SNTP server. 0.0.0.0 indicates no server
• Retries: How many times the 9145 tries to synchronize before trying the
alternate server or giving up. Range is 0 to 10
• Timeout (seconds): Wait period between unsuccessful attempts. Range is 1
to 30
• Priority: Set which server to contact first. Range is 1 to 255 with 1 the highest
priority and 255 the lowest. If the priority is the same for the two servers, the
9145 alternates tries between the servers.
3. To return to the Main Menu, press <Esc>.
To manually set the date and time, follow these steps:
1. From the Main Menu, type [ 6 ], "Utilities," and press <Enter>.
2. At the Utilities Menu, type [ 1 ], "Set Date and Time" and press <Enter>.
3. At the prompt to enter the current date and time, type the current information in
DD/MM/YYYY HH:MM format, then press <Enter>.
4. To return to the Main Menu, press <Esc>.
Canoga Perkins Corp. Ethernet Network Interface Device 04-Dec-2006
Model 9145-5 V96.05 F96 9145 DC_172.16.142.225 07:29:16
---------------------------------------UTILITIES--------------------------------
1) Set Date and Time
2) Reset Configuration To Default
3) Change Password
4) VT100 Baud Rate 9600
5) Slip/PPP Baud Rate 19200
6) PING Generation
7) Static ARP Table
8) Dynamic ARP Table
9) License Manager
Select [1-9]:
------------------------------------Messages------------------------------------