Panasonic AG-DP800HP - Manual (Page 19)

Counter
This indicates the time code and user bit data in units of hours,
minutes, seconds and frames. It serves as a 4-digit counter in the
reel count mode.
REMAIN
0 o * o o * o o * o o
U U ' U U ' U U ' U U
1
h
I
min
I
s
I
frm
i
Remaining battery level
display
This indicates the remaining battery levei.
The battery is set using the menu item. For further details, refer to
"How to set the menu items” (page 52).
Different kinds of batteries and their operating times are shown in
the tabie below. (The operating times shown apply when the unit is
used in the continuous recording mode.)
Bear in mind that the actual operating time will vary greatly depend­
ing on what shooting methods are used, whether old or new batter­
ies are used and on other such conditions.
Battery Operating time
(during
continuous
recording)
Model
number
Manufacturer Capacity
TRIMPAK14
DIGITAL
Anton/Bauer 40 WH 90 minutes
DIGITAL
HD MAG 14 Anton/Bauer 60 WH 160 minutes
AU-BP402 Panasonic 4 AH 140 minutes
AU-BP220 Panasonic 2,2 AH 70 minutes
NP-1B SONY 2.3 AH 70 minutes
Warning displays
RF: Flashing denotes that the video heads are clogged.
SERVO: Flashing denotes that the servo system is not iocked.
HUMID: Fiashing denotes that condensation has formed on the cylinder.
SLACK: Flashing denotes tape slack or some other problem in the tape
transport system.
END: Flashing denotes that the tape has come to its end.
19