Set the power switch to the on position, Press the stop button, Press the play button – Panasonic AG-DP800HP User Manual
Page 46
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
213
Set the POWER switch to the ON position.
The tape is automatically loaded onto the cylinder, the REC, PLAY
and PAUSE lamps come on, and the camera recorder is set to the
recording pause mode.
Press the STOP button.
f
--------------------->
STOP
■ ----------- -
■
s_______________
______________ >
During rec/play, the VTR will not be set to the stop mode even
when the STOP button is pressed. Press the VTR START/STOP
button first to suspend the recording and then press the STOP
button.
Press the PLAY button.
f---------------------
---------------------
N
• PLAY
►
<______________
______________
)
Noise will appear for an instant on the playback picture when the
mode is transferred from STOP to PLAY. This is normal and not
indicative of malfunctioning.
The playback pictures appear on the viewfinder and on a TV monitor
which has been connected to the camera recorder.
46