Panasonic AG-DP800HP - Manual (Page 69)

AUDIO Menu
Underlining denotes the mode set as the default.
Viewfinder sub menu
Mode set Functions
item
FRONT MIC -40 dB Selects camera’s mic input level.
(Front mie level) -50 dB
-60 dB
REAR MICCHI -40 dB Selects mic input level from AUDIO CH1 input connector in jack section.
(Rear micCHt level) -50 dB
-60 dB
REAR MICCH2 -40 dB Selects mic input level from AUDIO CH2 input connector in jack section.
(Rear mie CH2 level) -50 dB
-60 dB
LINECH1/CH2 +4dB Selects LINE input level from AUDIO CH1/CH2 input connectors in jack
OdB
-6dB
section.
PHANTOM CHI ON Selects whether phantom mic (CH1) is to be used.
(Phantom CH1 power) OFF ON; Phantom mic (+48 V) is used.
OFF: Normal mic is used.
PHANTOM CH2 ON Selects whether phantom mic (CH2) is to be used.
(Phantom CH2 power) OFF ON: Phantom mic (+48 V) is used.
OFF; Normal mic is used.
HI-FI REC ON Selects whether Hi-Fi audio is to be recorded.
OFF ON: Hi-Fi audio is recorded.
OFF: Hi-Fi audio is not recorded.
DOLBY NR ON Sets Dolby NR ON or OFF.
OFF ON: Dolby NR is turned ON.
OFF: Dolby NR is turned OFF.
STEREO/MONO STEREO Selects the input sound mode from AUDIO CH1/CH2 input connectors in jack
MONO section.
STEREO: Stereo sound is selected.
MONO: Monaural sound is selected."
Example of display on EVF or at LINE OUT connector of VTR
- AUDIO -
0 1 FRONT MIC -50dB
02 REAR MIC CHI -50dB
03 REAR MIC CHE -50dB
04 LINE CH1/CH2 OdB
-^05 PHANTOM CHI OFF
06 PHANTOM CHE OFF
07 Hi-Fi REC ON
08 DOLBY NR OFF
00 STEREO/MONO STEREO
♦ * PREVIOUS MENU
- -
- - END OF DATA -
- - -
*When LTC REG
(page 67) is set to ON,
only cm can be used
as the normal audio
channel.
If MONO is now
selected on this menu,
the sound from two
microphones (or lines)
can be mixed and
recorded.
(However, Hi-Fi audio
will also be mixed.)
69