Panasonic AG-DP800HP User Manual
Page 59
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
B Press the SHIFT button to align the arrow on the far left with the item to be set.
- SCENE FILE A -
PAGE 1
- SCENE FILE B -
PAGE E
01 H DTL
10
08 C GAIN 1
- l E B
□E H DTL FREQ
1
09 C GAIN E
□
03 V DTL
0
10 C PHASE 1
+ 1E7
-►04 LEVEL DEP 1
31
11 C PHASE E
+ 10
05 DARK DTL
ON
06 CORING
10
07 CHROMA DTL
16
-► ■ DATA SAVE
+ +PREVIOUS MENU
♦ * PREVIOUS MENU
PAGE E:PUSH START
PAGE 1 :PUSH START
Q Press the SET + or SET — button to change the data to be set.
• Pressing the SET + button increases the data setting.
• Pressing the SET - button decreases the data setting.
• Keeping either button depressed enables the data to be changed continuously.
B When the START button is pressed, page 2 of the scene file setting screen appears.
The data settings can be changed in the same way as for page 1.
B Data back-up
•Align the arrow with DATA SAVE, and press the START button.
•When this step is not performed, the data settings are valid only while the power is supplied. Once the power has been
turned off, the settings will be lost and the past data will be restored.
Q When the START button is pressed, page 1 of the scene file setting screen appears.
59