Panasonic AG-DP800HP - Manual (Page 47)

Automatic S-VHS/VHS identification and playback
Tracking
This camera recorder’s playback circuitry is designed to identify the
cassette’s recording system automatically.
Recording system S-VHS display
S-VHS On
VHS Off
If noise should appear during playback, adjust the SET + and SET
- buttons until the picture is restored to normal.
• It may not be possible to eliminate the noise adequately on
a tape which was recorded on another VTR.
•The tracking adjustment remains effective until the tape is
ejected. (When the tape is ejected, the tracking value which
was set before the camera recorder was shipped from the
manufacturing plant is restored.)
•The tracking value which was set before the camera re­
corder was shipped from the manufacturing plant can be
restored by pressing the SET
+ and SET - buttons simul­
taneously.
AUDIO SELECT switch
AGC^^
-----\
LIMIT r—1
OFF<^ l^NORM
AUDIO SELECT
This switch can be used to select normal audio or Hi-Fi audio for the
audio output signais.
The sound heard through the monitor speaker can be set to CH1,
MIX or CH2 by the audio monitor selector switch.
47