Note, Setup, Setting the date and time – Panasonic KX-FT37NZ User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
li;.
Setup
Programming the date and time, your name
and facsimile telephone number ■
You can program the date and time, your logo and facsimile telephone number and this informaiion will
be printed on each page transmitted from your unit.
Your logo
Your facsimile telephone number Date and time
Example:
FROM ; Panasonic Fax
PHONE NO. :'1234567* '
f
EB. 26 1998 04:02P
m
' PI
Fa»; Correspondence
Setting the date and time
(P
T3
09
II
1
2
Press [MENU}.
Display:
Press @, then [Ô]
(Tj.
1.SYSTEM SET UP
SET DATE & TIME
Press [START/COPY/SETl.
M:01/D;01/Y;98
__p----- ^1::^-----
'—Cursor
Enter the correct month/day/year by selecting
each 2 digits.
Exampie: Aug. 10, 1998
Press (MS IIISKiKIl-
M:08/D;10/Y:98
Press [START/COPY/SETl.
TIME:
12:00AM
Enter the correct hour/minute by selecting
each 2 digits. Press [*| to select “AM” or “PM”.
Exampie: 3:15PIV1
1
. Press [o]® SE ■
7
8
TIME: Û3:15AM
2. Press @ until “PM” is displayed.
TIME: 03;15PM
D-
Press (START/COPY/SEI
SETUP ITEM [ ]
Press [MENU].
Dial keypad
©©©
® © ©
0® ©
[MENU]
[START/COPY/SETl
Note;
• The [*) key can be used to select “AM" or “PM”
wherever the cursor is located.
• The accuracy of the clock will be approximately
±60 seconds a month.
• This unit is year 2000 compliant.
To correct a mistake
• Press or r»*-! to move the cursor to the
incorrect number, then make the correction.
• if you press [ STOP 1 while programming, the
display will return to the previous one.
21