Panasonic KX-FT37NZ - Manual (Page 32)

Voice Contact
Talking to the caller after fax transmission or
reception ............
You can have a conversation with the same cal! after a fax message is completed. This will save the added
expense and time of making another call.
This feature only works when the other party’s unit is equipped with a voice contact feature.
Initiating voice contact
1 Press (DiGITAL SP-PHONEI while transmitting or
receiving documents.
Display: voice standby
® Your unit will call the other party with a distinctive
ring.
e When the other party answers, your unit will emit
a distinctive ring.
2 Press [DIGITAL SP-PHONÈÌ or lift the handset to
start talking.
Note:
« if you initiate voice contact during transmission, the
unit will call you with a distinctive ring after all of the
documents have been transmitted.
® If you initiate voice contact during reception, the unit
will call you with a distinctive ring after the current page
of the document is received.
Receiving a request for voice contact
1 If the other party initiates voice contact, your unit
will sound a distinctive ring and the following will be
displayed.
Display; PLEASE PICK UP
Press [DIGiTAL SP-PHONSl or lift the handset
within 10 seconds of the distinctive ring to start
talking.
Note;
® if you do not answer within 10 seconds of the
distinctive ring:
— in the TAD/FAX mode, your unit will play a greeting
message and record an incoming voice message.
— in the FAX ONLY, TEL or TEL/FAX mode, the line
will be disconnected.
32