Tel/fax mode, Silent ring fax recognition system, Note – Panasonic KX-FT37NZ User Manual
Page 45: Receiving voice calls with rings, Fax calls without rings)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
i'S-
TEL/FAX mode
Receiving Faxes
(receiving voice calls with rings
and
fax calls without rings)
Use this mode when you wish to receive voice calls with rings, but do not want the unit to ring when faxes are
received.
When a call is received, the unit will work as follows.
A call is received.
I
The unit will automatically answer the call without ringing.
(A telephone fee will be charged to the caller.)
• If a TEL7FAX greeting message is recorded (see page 59), it will be played to the
caller.
if an extension telephone is connected, it will only ring before the call is answered.
♦
The unit will now distinguish between a voice and fax call by detecting the fax
calling tone.
Fax call
Voice call
The unit will receive a document.
Silent ring fax recognition system
The unit vyill start to ring.
• While ringing, the unit will emit a
different ring back tone to the calling
party.
I
Answer the call using the DIGITAL
SP-PHONE or the handset,
e If you do not answer the call by a
preset number of rings, the unit will
switch to the fax. This is for machines
that do not send a fax calling tone.
^ Regarding the ring pattern when an extension telephone is connected, see page 46.
Note:
• Some fax messages that are transmitted manually may not send a fax calling tone. These calls must be
received manually.
■H:
su ^
O ;
% 1
45