Erasing a specific message, Voice guide example, Recording a marker message – Panasonic KX-FT37NZ User Manual
Page 68: Re-recording a greeting message, Erasing all messages, Other remote operations recording a marker message
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Erasing incoming messages from memory
Remote Operation
Erasing a specific message
Press @ SI while listening to the message you want to
erase.
—A long beep and the voice guide will be heard.
Then the unit will continue with the next message.
Erasing all messages
Press @ ® to erase all messages.
—A long beep and the voice guide will be heard.
Voice guide example:
Voice guide example:
The message has been erased.
All messages have been erased.
Other remote operations
Recording a marker message
After playing back the recorded messages, you can leave an additional message.
Voice guide example:
1. Wait for the voice guide to tell you that the remote
operation has ended.
2. Wait about 10 seconds for the voice guide to prompt
you to leave a message.
3. Leave a message after the beep.
All messages have been played.
Please leave your name and message
after the beep.
Re-recording a greeting message
You can change the contents of the greeting message for the TAD/FAX mode.
1. Press [7) to start recording.
» A long beep will sound.
2. Speak clearly up to 16 seconds.
® If you pause for over 2 seconds, 6 beeps will sound and the recording will stop. Repeat from step 1 within
10 seconds.
3. When finished, press [Jj.
e The new greeting message will be played.
68