Panasonic KX-FT37NZ - Manual (Page 71)

Options
Recording a message transfer greeting message
The recording time is linnited to 16 seconds. Record your message within 12 seconds for best performance.
Suggested message
Message transfer greeting message
Note:
‘This is a transferred message from (your name, business and/or
telephone number). Please enter your remote ID for the remote
operation.“
® If you do not record a message, the pre-recorded message will be played (see page 70).
1
2
3
4
Press (MENU].
Display:
Press @, then [6] [T].
1.SYSTEM SET UP
TRNS-GREETING
Press iSTART/COPY/SET].
CHECK TA
Press [T] or [A] to select "RECORD”.
RECORD T A
Press iSTART/COPY/SET].
TRWS REC. 16s
Speak clearly about 20 cm (8 inches) away from
the microphone.
• The display will show the remaining recording
time.
Example; TRWS REC. 15s
When finished, press i STOP ].
• The unit will repeat your message. You can
adjust the volume using 1 ▼ j or j.
8
To exit the program, press [MENU].
Dial keypad
Microphone
[SfARt/(^PY/SET]
>
'3
0)
i
5'
ua
o
o
<
o
<D
To check your message
Select "CHECK” by pressing j ▼ | or \ ~ A \ in step 4,
and press (START/COPY/SET).
• The unit will play your message.
To exit the program, press (MENU).
To erase your message
Select “ERASE" by pressing fV I or i A I in
step 4, and press (START/COPY/SET].
To exit the program, press (MENU).
® The pre-recorded greeting message will be
played instead of your message.
71