Fax only mode, All calls are received as faxes), Fax only mode (all calls are received as faxes) – Panasonic KX-FT37NZ User Manual
Page 48: Activating the fax only mode _ receiving faxes, Changing the tad/fax mode to the fax only mode
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
FAX ONLY mode
(all calls are received as faxes)
Activating the FAX ONLY mode _
Receiving Faxes
Turn on the AUTO RECEIVE mode by pressing
[AUTO RECEIVE] until the AUTO RECEIVE light
turns on.
o The display will show the following.
Display:
fax
only
mode
® If the AUTO RECEIVE setting is set to the TAD/FAX
mode, reset it to the FAX ONLY mode (see below).
» The unit will automatically answer ail calls and only
receive fax documents.
® The number of rings before a call is answered can be
changed (see the next page).
Changing the TAD/FAX mode to the FAX ONLY mode
Change the AUTO RECEIVE setting from the TAD/FAX mode to the FAX ONLY mode.
Dial keypad
Press (MENU].
Display;
O Press @, then E [s].
1.SYSTEM SET UP
AUTO RECEIVE
MODE=TAD/FAX VA
0 Press [START/COPY/SET].
^ Press [T] or S] to select “FAX ONLY".
g Press (START/COPY/SET).
Press [MENU].
MODE^FAX ONLY
V A
SETUP ITEM [
]
I©
©’©I
© © © I
© © ® i
© © ® i
fSTART/COPY/SETl
Note:
©To return to the TAD/FAX mode, select “TAD/FAX"
in step 4.
48