Panasonic KX-FT37NZ - Manual (Page 72)

Setting the message transfer/pager
Options
call
1
2
3
4
5
6
Press (MENU).
Display: 1.SYSTEM SET UP
Press @, then [6] [p].
MESSAGE TRANS.
Press [START/COPY/SET).
MODE-OFF V A
Press [T] or [A] to seiect “MESSAGE” or
“PAGER”.
MESSAGE: transfers incoming messages.
PAGER:
calls your pager.
OFF: turns off this feature.
» If this feature is not required, select "OFF”.
Press [START/COPY/SETl.
NO.=
a; 9f you selected “MESSAGE” in step 4:
Enter the transfer telephone number,
b: If you selected “PAGER” in step 4:
Enter your pager number.
9 You can enter a total of 46 digits and/or pauses.
Example:
1 202 555 1234PPP12345678PPP5555#
I____ ______ !L
Your pager
number
Pauses
Your pager access
code, if required.
Message you want displayed
on your pager when a
voice message is recorded.
’ Y Press [START/COPY/SET],
g Press [MENÜ].
SETUP ITEM [ ]
Dial keypad
; © © ©
I ® ® ®
i® ®_®
CZD CZ3 CTD
[MENU]
f REDIAUPAUSE] [ START/COPY/SET]
(Pause)
Note:
• This feature can be turned on/off remotely
from a touch tone telephone (see page 69).
How your unit and pager work
Pager
Your pager
company
When your unit receives
a voice message, it will call
your pager company.
Your pager
company will
call your pager.
A few minutes later, your pager
will display the same message
you entered in step 6.
(For example: 5555)
72