Panasonic SC-AK90 - Manual (Page 23)

DECK!
f
^
REV MODE
HEOSTOP
*%
Tape direction
1
f
(§) ^-^1
TRPE
—
<E) ^ flm
TRPE IU1
J-IJ JJJ
JJJ
J-IJ
^ ¿09 (¡^
WiC^ '*0
•n T r JJ ± J u
Sioj I
-UJ
-»-»J
f
figd
W9 -u X ^ L " I c r
s.-nrci:
J.JJ
-t-IJ
C5®JL?ii
>2 jii 5 c edt-
5m
'SJS jj
nxiu
—"X >
sa fsA
sisnj M
a 1 n- n
( u- u
f fUT
1
Recording from CDs
Press DECK 2 ^ OPEN, and then insert the
tape.
Close the holder by hand.
Tape direction is automatically set to "►
B
Press REV MODE to select the reverse mode.
Every time you press the button;
X: One side is recorded, then recording stops auto­
matically.
7 *~), c^y. Both sides (front side—> reverse side) are recorded,
then recording stops automatically.
Q Press CD.
□
Set CDs in the rack.
(See page 12.)
B Press DISC/TRACK to seiect the CD selection
mode.
(The indicator illuminates with a green color.)
m Turn JOG to seiect the desired CD number.
While the CD number is flashing (approx. 10 seconds)
Press • REC/STOP to start recording
• If you selected in step 2, the direction will automatically
change to when recording starts.
•The recording will proceed from the first track on the selected
CD.
To stop recording
•To add a 4 second silent interval before stopping.
Press The CD will stop automatically too.
•To stop recording without a silent interval
Press # REC/STOP, The CD will stop automatically too.
To record on reverse side
Before recording, load a tape and change the tape direction as ex­
plained here below.
1. Press TAPE DECK 1 /2 and select tape deck 2.
2. Press M and immediately thereafter ■ . The tape direction will be
shown as
To record from a specific point on a tape
Before recording, advance the tape to the point from where you want
to start recording.
To record programmed tracks
1. After step 4, program the track you want (performs steps 2-6 on
page 16).
2. Press # REC/STOP to start recording.
I
5
0)
6
O)
c
"S
o
u
o
oc