Panasonic SC-AK90 - Manual (Page 9)

Perno function q
The demo function changes the display to simulate an airplane taking
off from an airport.
Turning the demo function ON/OFF
Press POWER and hold down DISPLAY/DEMO.
Every time you hold down the button;
DEMO (ON) ^NO DEMO (OFF)
When the demo function is ON, the demo is played automatically in
the following cases.
•When the system is ON
If the input source is set to CD or tape, and the system is left on
standby for more than 2 minutes
•When the system is OFF
If the clock has not been set
Se№n0 ffie time m
This is a 12-hour display clock.
This example in the figure shows how to set the time for 6:25 p.m,
n Switch on the power.
Q © Press CLOCK/TIMER to select “CLOCK”.
Every time you press the button;
CLOCK->® REC-*® PLAY
^—Previous display*-----1
@ (within 5 seconds or so)
Press MEMORY/SET.
pel © Press V or A to select the hour.
CD Press MEMORY/SET.
CD Press V or A to select the minutes.
©Press MEMORY/SET to finish setting the
time.
The display will return to whatever was displayed before
you set the time.
To display the time when power is ON
Press CLOCK/TIMER to select "CLOCK".
The time will be displayed for about 5 seconds and then the display
will return to whatever was previously displayed.
C
o
'C
s
0
1