Panasonic SC-AK90 - Manual (Page 31)

Using the play timer
Preparations
•Make sure that you have completed "Setting the time" on page 9,
•Switch on the power.
The figure shows how to set the play timer for playing a CD from
6:30 a.m. to 7:40 a.m.
Press CLOCIVriMER to select “© PLAY’
(T) Every time you press the button;
CLOCKS© REC^© PLAY
Previous display<—-I
(Within 10 seconds or so)
Press MEMORY/SET.
0
C
"ON" time setting
0 Press V or A to select the starting hour.
0 Press MEMORY/SET.
Press V or A to select the starting minutes.
©Press MEMORY/SET.
0 "OFF" time setting
0 Press V or A to select the ending hour.
©Press MEMORY/SET.
0 Press V or A to select the ending minutes.
@ Press MEMORY/SET.
Source selection
Select the desired source and then prepare for
playing.
When you play CD(s)
Press CD and insert CD{s),
If more than 1 CD is loaded
0 Press DISC/TRACK to select the CD selection mode.
(The indicator illuminates with a green color.)
(g) Turn JOG to select the desired CD number.
(^ Press CD ► and then press ■ .
When you play tape(s)
Press TAPE DECK 1 /2 and insert tape(s).
If tapes are loaded in both decks, playback will start from deck
2 .
When you play the radio
Press TUNER BAND and tune in the desired station.
When you play a unit connected to the “AUX” terminals
Press AUX.
Bf Ploy volume setting
Set the playback volume.
B
Press © REC/© PLAY to select “© PLAY”.
Every time you press the button;
® REC-------- >© PLAY
't^Out (OFF)^
The system will be turned OFF automatically in a few seconds.
The timer play will start at the preset time with volume increas­
ing gradually up to the volume level you preset.
To switch the timer OFF
Press © REC/© PLAY and check "© PLAY" goes out.
If you set the timer wrongly
Press ® REC/® PLAY so that "® PLAY" goes out. Then, repeat the
procedure from step 1.
To check settings
Press CLOCK/TIMER to select "© PLAY".
Two seconds later, the display will change in the following order,
© Play start time
(2) Play over time
(3) Play source and playback volume
You can check settings even when the system is OFF.
To enjoy the desired source after the timer setting Is
completed
Even if you change the volume level or music source, the timer play
will start with the preset condition.
1. Following step 6, turn ON the power and start playing the desired
source.
When you select a CD as the program source
After the CD finishes, if more than 2 CDs arc loaded in the
changer follow the procedure below.
© Press DISC/TRACK to select the CD selection mode.
(The indicator illuminates with a green color.)
© Turn JOG to select the desired CD number to start the play.
@ Press ■ .
2, Press POWER to standby mode after enjoying the play, and con­
firm CD(s) or tape(s) has (have) been inserted.
Turning the timer ON/OFF
As long as "© PLAY" is displayed, the play timer will come ON
everyday as set.
You can turn the timer ON/OFF by pressing © REC/© PLAY while
the system is OFF.
Remember that when "® PLAY" is displayed, the timer is ON. When
not displayed, the timer is OFF.
• If the power is on, the timer will not function. The system must be
in the standby mode,
• If you switch the power to the standby mode while the play timer is
functioning, the OFF time setting will not be activated,
• If AUX is selected as the source, when the timer comes ON, the
system will turn ON and will engage "AUX" as the source. If you
want playback from a connected component to start, set the
component's timer to the same time, (See the instruction manual
that came with the component.)
g
I