Setting your id number (fax telephone number), Repeatedly until display shows, User parameters – Panasonic PANAFAX UF-321 User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
User Parameters
Setting Your ID Number (Fax Telephone Number)
If the remote machine does not have a Character ID but it has an ID Number, when sending or receiving, your
ID Number will appear on the remote machine’s display and their ID Number will appear on your display.
We suggest you use your facsimile telephone number as your ID number for up to 20 digits long.
SET MODE
(1-5)
ENTER NO.
OR A V
1:USER
PARAMETERS?
PRESS SET TO SELECT
__
SET
3
repeatedly until display shows;
ID NO.
Enter your ID (max. 20 digits) by using the key pad and
I SPACE I.
Ex: [2] [0] m [IMCB E] d] iU
1 SPACE imr^mr^
If you make a mistake, press I CLEAR I to erase the
number then reenter the correct number.
@ STOP
p m
ID NO.
201 555 1212
m
Note: 1. You may use
H
to enter a character at the beginning of the ID number to indicate the following
digit(s) for your country code.
Ex: +1201 555 1212
+1 for U.S.A. country code.
+81 3 111 2345
+81 for Japan country code.
2. For some countries, this feature is not a vailable depending on the country's regulation.
The display may not show this feature.
25