Panasonic PANAFAX UF-321 - Manual (Page 60)

Receiving Do(pmerits ’ ' • ' V ^’- •• ' -V i ’-
-нГ^ , 4^ 4* .- iéiT^'^-^SXiL.- MjàlJÈiéf \Чнк^-i* ¡i ^t-iilUt/tiL*^
Щ.
Setting the ТАМ Interface Mode
Change Fax Parameter No. 16 (UNATTENDED MODE) to 2: TAM I / F. (see page 34) 1
2 RCVMODE
Confirm that the lamp is ON and the display as shown to the
right.
08-DEC-1993 15:00
RCV MODE=FAX/TAM 00%
Operation of TAM Interface Mode
1
When your TAM and Fax receives an incoming call, the TAM always answers the call first
and then the TAM sends an OGM (Outgoing Message) recorded in your TAM to the calling
station. During the time the TAM is answering the call, your fax machine will be monitoring
the line to distinguish whether it is a voice or fax call.
If the call is Fax call,
2a Your machine will switch the line to the
fax and then begins to receive the
documents immediately from the
calling station.
If the call is Voice call,
2b Your TAM continues to record a
message (ICM) after sending out an
OGM.
Sample of OGM
Hello, this is Smith, Sorry I am unable to take your call. Please leave your message after the
beep or if you are calling to send a fax, press the asterisk button twice on your touch tone
phone now and start your machine. Thank you for calling.
58