Setting the telephone mode, Operation of telephone mode, R^^lymg [^curwb^ti – Panasonic PANAFAX UF-321 User Manual
Page 56: Telephone mode
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
R^^lymg [^curWb^ti
Telephone Mode
When your machine is set to this mode, your machine wili not receive documents automatically, if you receive
a fax call, follow the procedure to receive documents manually.
Setting the Telephone Mode
Change Fax Parameter No. 15 (ATTENDED MODE) to 1 : Tel. (see page 34)
1
o [;
nCV MODE
1
Confirm that the lamp is OFF and the display as shown to
the right.
08-DEC-1993 15:00
RCV MODE=TEL 00%
Operation of Telephone Mode
When your telephone rings, lift the fax handset or an extension phone.
¡Tf you hear a beep from the phone, it means someone wants to send a fax. Or, if the caller |
|_answers and says he/she wants to send a fax, then^^^___
^
Remove the document from ADF, if any.
3a
|lf you answered the call using th^ |
|_fax handset, (See Note 1)___ _|
O START
tj
4
Hang up the phone.
3b
I If you answered the call on an |
l_extension phone,
_[
n a
within
1
second
from the extension
phone, (see Note 2)
Your machine will be activated
remotely.
ffl
Note:
1. If your machine does not have the handset, follow the step 3b.
2. This procedure is called "REMOTE RCV" and will work on a touch tone phone. If your extension
phone is not touch tone phone, press
1
START
I
on the control panel of your fax machine.
54