Troubleshooting – Panasonic PANAFAX UF-321 User Manual

Page 85

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Troubleshooting

Mode

Symptom

Action

page

Cannot utilize the remote
turn-on feature of the

telephone answering

machine (TAM). The fax
machine always answers
after the 8th ring.

This feature is not compatible. The fax machine is

designed to answer after 8 rings if the TAM does

not answer.

Fax machine will not start
up when the telephone

answering machine is set
to give only an outgoing

message (OGM).

TAM give outgoing announcement only is not compatible.
The fax machine will work with a TAM that will record

Incoming message (ICM).

A beep...beep sound is

recorded on the telephone

answering machine.

Speak a little slower between each word while recording
an outgoing message (OGM).

Fax machine start up in

the middle of the outgoing

message even through the

caller wants to leave a
voice message.

Make sure the outgoing message (OGM) does not have a

silent pause longer than 5 seconds.

TAM Interface
Trouble in

Unattended TAM l/F
Mode

Cannot record any

incoming message (ICM).
The fax machine always
starts up at the end of the
OGM and before the tape

advances to the end of

last ICM.(Your TAM only
uses a single cassette

tape to give OGM and to

record ICM.)

Set Fax Parameter No. 20 (Silent Detection) to "Invalid".
And, instruct the calling party to press * twice on their
touch-tone phone during the OGM to start up your fax
machine remotely.

35

Cannot receive from a
machine that does not
send CNG signal (a short
beep tone every 3
seconds) after dialing.

Set Fax Parameter No. 20 (Silent Detection) to "Valid".
Or, Instruct the calling party to press * twice on their
touch-tone phone during the OGM to start up your fax
machine remotely.

35

Cannot retrieve message

from the answering

machine remotely, the fax
machine always starts up
after the command code is
entered.

Set Fax Parameter No. 20 (Silent Detection) to "Invalid".

35

Cannot receive a fax
message, but can record
voice message.

Check your outgoing message, if it is too long, the calling fax

machine may have timed out. Try shorten your outgoing
message to less than 15 seconds, or ask the calling party to
program your telephone number in their fax machine with 3
pauses and a "#" at the end.(ex. 5551212

PAUSE PAUSE

PAUSE #)

TAM Interface
Trouble In

Unattended Fax
Mode

Fax machine will not start

to receive with the
telephone answering
machine in the
auto-answer mode.

Increase the ring count for detection on the telephone

answering machine.

8

83

Advertising