Deferred transmission, Set document(s) face down, Ex: [2][3][3][0]{11:30 p.m.) and i set – Panasonic PANAFAX UF-321 User Manual

Page 65: See note 2), Dial by any combination of the following methods, Manual number dialling (up to 3 stations), One-touch dialling, Abbreviated dialling, To store documents into the memory, Timer controlled communications

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Timer Controlled Communications

You can send a document to one or multiple stations at any preset time within the next 24 hours. Up to 2 built-in
timers can be set for deferred transmission and deferred polling.

Deferred Transmission

1 j

2

3

4

5

6

m

Set document(s) face down.

Enter start time using the keypad.
(Use a 4-digit, 24-hour clock)

Ex: [2][3][3][0]{11:30 p.m.) and i SET

MEMORY

(See Note 2)

Dial by any combination of the following methods.

• Manual Number Dialling (Up to 3 stations)
• One-Touch Dialling

• Abbreviated Dialling

Ex:

(When entering a station for Manual Number Dialling, press

I SET i after each station is entered.)

<3>

START

■fe

to store documents into the memory.

DOCUMENT SET

ENTER STATION

00%

DEFERRED COMM. NO.=l

1:XMT 2¡POLLING

DEFERRED XMT

START TIME

I :

DEFERRED XMT

ENTER STATION(S)

ONE-TOUCH

<02>{Station name)

* STORE *

N0.002

PAGES=01 05%

* STORE * COMPLETED

TOTAL PAGES=05 30%

Hole: 1. If you enter a wrong number in Step 4, press

I CLEAR I

then re-enter the right number.

2. if you wish to send the document without storing into memory (memory may not be big enough for

storing the entire document), skip step 5 and enter only one station in step 6. In this case the document

will remain on the ADF for Timer Transmission after step 7.

If you resen/ed the deferred transmission without storing into memory, the display shows "TIMER’’ on

the upper right corner after pressing

I START 1

in last step.

3. To change or cancel the Deferred Communication settings, see page 68 and 69.

4. Up to 2 Deferred Communication files (3 Memory Transmission, 1 polling XMT file ora combination not

exceed maximum of 3 files) can be set.

63

Advertising