Sending documents, Multifile transmission – Panasonic PANAFAX UF-321 User Manual
Page 53
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Sending Documents
Multifile Transmission
When you have to send several documents to different stations, you do not have to wait until each
transmission is completed. You can store all the different documents into memory and program the machine
to dial each telephone number for each document. Instead of sending the documents separately, you can
reserve all the transmission at one time.
1
2
3
4
5
6
m
Set document(s) face down.
MEMORY
Make sure that the MEMORY lamp is on.
Dial by any combination of the following methods.
• Manual Number Dialling (Up to 3 stations total in all files)
• One-Touch Dialling
• Abbreviated Dialling
{For details, see page 43 to 45.)
Ex:
01
tasbr
imn^
(When entering a station for Manual Number Dialling, press
I
SET
I
after each station is entered.)
MEMORY
a
^
I
to store the document into memory.
The document is stored into memory with a file number.
Repeat step 1 through 4 for each document that you are
sending, (see Note 3)
O START
DOCUMENT SET
ENTER STATION
00%
Your machine starts to dial the telephone number in
sequence.
Note:
1. You can review the stations you entered in step 3 before storing your document into memory by
pressing
0 or 0 •
Pf6SS
I
CLEAR
I
to clear an entered station show on display if needed,
2. The home position of MSMORY key can be set by Fax Parameter No. 05.
3. Up to 3 Memory Transmission flies (2 Deferred Communication, 1 polling XMT file or a combination not
exceed maximum 3 files) can be set
A
51