Set document(s) face down, Make sure that the memory lamp is on, Enter a telephone number from the keypad – Panasonic PANAFAX UF-321 User Manual
Page 49: Sending documents
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Sending Documents
To dial the telephone number manually using the keypad, follow the steps below.
Manual Number Dialling (Memory Transmission)
1
Set document(s) face down.
DOCUMENT SET
ENTER STATION
00%
MEMORY
2
Make sure that the MEMORY lamp is on.
3
Enter a telephone number from the keypad.
Ex: [5][1][HIT][2]SIS]
TEL, NO.
55512341
O START
tS
STORE *
N0,002
PAGES=01 05%
* STORE * COMPLETED
TOTAL PAGES=05 25%
The document is stored into memory with a file number.
Then starts to dial the telephone number.
* DIALLING
55512341
m Note:
1. If you need a special access number to get an outside line, dial it first then press
I PAUSE I
to insert
a pause (represented by a before dialling the full number.
Ex: 9 PAUSE S5S1234
2. If you are using Pulse dialling and you wish to change to Tone dialling in the middle of dialling, press
I TONE
Ifreoresented bva T).
The dialling mode will be changed from Pulse to Tone after dialling the digit T.
3. To stop the transmission,
oressf STOP I.
The display shows;
COMMUNICATION STOP?
1:YES 2:N0
Press
[T]
to Stop the transmission. The document you stored will be erased
aufoma//i;a//y.
47