When removing a module – Panasonic CF-E1M User Manual
Page 35
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
6
Inserting / Removing the RAM module
<When inserting a module>
-0 Insert the RAM module at an angle.
X
note
)------------------------------------------------------------
Be aware of the direction and angle of the RAM module when inserting it. It will be
difficult to insert the module if there is a mistake in the direction and angle between
the RAM module and the slot.
Push down on the RAM module until it locks with the top and bottom
hooks.
Hooks (on both sides)
<When removing a module>
0
Move the hooks on both sides to the outside direction.
The RAM module will rise at an angle (dotted line).
Remove the RAM module at an angle.
Repiace the cover and screws removed in Steps 3to 5
35