Panasonic CF-E1M - Manual (Page 9)

Left Side
Reset Button | ^
When resetting your computer, use a dull pointed ob­
ject. Do not use a pencil. Pencil lead can break off
inside and damage the computer.
r
If a problem occurs but your computer does not
lock, we recommend not pressing the reset button.
It will cause you to lose data if an application is
open.
RAM Module Slot
(Cr page 33)
USB Ports I
IEEE1394 Interface Connectors
\S400
Connect to devices under the IEEE 1394
standards, such as a DV deck or digital video
camcorder.
Connect to various peripheral devices (c.g., printers and a floppy
disk drive) that arc USB compatible even with the computer on
(O’ page 28). It may be necessary to install a driver program for
a USB device; the driver program will be included with the de­
vice. Be sure to read the instructions manual provided with the
USB device.
A note >
PC Card Slot
Use the PC Cards that conform
to the PC Card Standard.
(C^ page 31)
*— PC Card Eject Button
(C^ page 31)
Optical Digital Audio Output Terminal
Outputs to a player such as an MD deck with an opti­
cal input terminal, without any noticeable degrada­
tion in the digital sound quality of CDs and DVD.
(Cr page 32)
Driver programs do not need to be installed for the mouse, keyboard and floppy disk
drive provided with this computer.
note )-
Removing the dust protection cap for the Optical Digital Audio Output Terminal
After removing the dust protection cap, store the removed cap in safe place. When
the terminal is not being used, be sure that the cap is covering the terminal.
Dust Protection Cap