Connecting the printer and power on, Setup – Panasonic KX-P6500 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setup
Close the left cover.
Notes:
•
PLEASE DO NOT THROW AWAY THE PACKING
MATERIALS.
YOU
MAY
NEED
THEM
TO
SHIP
OR TRANSPORT THE PRINTER.
•
TO
PROVIDE
OPTIMUM
QUALITY
THE
UNIT MUST BE UPRIGHT AND KEPT LEVEL AT
ALL TIMES.
Connecting the Printer and Power On
I
_____ _ . j
This printer is equipped with a bidirectional parallel interface. If you do not have an interface cable, you will need to
purchase one from your local computer store or dealer.
^ Turn OFF the printer and computer.
2 Plug one end of the cable into the parallel
interface connector of the printer.
Snap the clips into place.
If the cable has a frame ground wire, connect
it to the frame ground terminal.
14
0
Plug the other end of the cable into the
connector at the computer.
Notes:
•
The actual connector on the computer
may differ depending on the manufac
turer of the computer.
•
If the cable is connected to PC via
printer
buffer
or
selector,
the
printer
may not print.
Plug one end of the power cord into the
printer’s power connector plug.
Plug the other end of the power cord into a
3-prong AC wall socket.
0
Turn ON the printer and computer power
switches.
The printer is warming up.
The READY indicator, the ERROR indicator and
TONER/PROCESS
UNIT
indicator
start
lighting
one after another.
0 The printer is ready for printing.
The READY indicator is on.