Panasonic KX-P6500 - Manual (Page 49)

Using the Printer in MS-DOS
Control Panel Settings
The Control Panel can handle five types of settings: Page, Font, Quality, Memory, and Other. When you change a
setting in one of these categories, then confirm by entering OK, Control Panel will send the updated settings to the
printer.
Page Setting
The Page Setup option lets you update settings that affect the page.
□
Page Setup
1
60
Copies;
Lines/Page:
Orientation ------
♦ Portrait
Landscape
g Paper Size:
Form Feed
♦ Auto
Manual
Letter
t
Legal
A4
Executive
Monarch
Envelope #10
4
Q Auto Continue
OK Cancel
Copies
Enter the number of copies that will be printed for each
print job. You can enter any number between 1 and 999.
Lines/Page
Enter the maximum number of text lines to be printed on
each page. You can enter any number between 5 and
128.
Note that if you change either orientation or paper size,
the number of lines per page will be updated automati­
cally to reflect the current orientation and paper size
selections.
Orientation
Sets the printer to print in either Portrait (vertical) or
Landscape (horizontal) mode.
Form Feed
Select whether the printer will feed paper automatically
from a paper tray, or whether sheets of paper must be
manually fed to the printer one at a time.
If you start printing when Manual is selected, the
ERROR indicator on the printer will blink. If this occurs,
paper will not be fed to the printer unless you press
PRINT/RESET button for less than 5 seconds. However,
if Auto Continue check box is clicked on, the ERROR
indicator will blink for about 10 seconds, and then paper
will be automatically fed.
Paper Size
Select the size of the paper loaded in the printer.
Auto Continue
Specifies whether the printer should automatically con­
tinue the current print job in the case of certain non-fatal
errors.
OK
Enter OK to update the printer with the settings as they
appear on the screen.
Cancel
Enter Cancel to ignore any changes made to the screen.
All fields will be restored to their earlier settings, and the
printer profile will not be updated.
X
■b
o>
cn
o
o
O
o
3
"O
0)
3
(D
49