Panasonic KX-P6500 - Manual (Page 56)

Care and Maintenance
Trouble Possible Cause Corrective Action
Printout is raggedy Screen fonts may be
selected
Replace the screen fonts with TrueType fonts. To show
only TrueType fonts in applications, follow the
procedure below.
1. Double click the Main icon in the Program Manager.
2. Double click the Control Panel icon.
3. Double click the Fonts icon.
4. Click [TrueType].
5. Select “Show Only TrueType Fonts in
Applications”, and click OK to exit the TrueType
dialog box.
Error Indication
Indicators
Possible Cause Recovery h
ERROR
о
READY
TONER/
PROCESS
UNR
S <
у
Ш □
□
Output tray (top cover) is not open. Open the output tray (top cover).
Paper jam has occurred. Remove the jammed paper, then open the left cover
and close it.
Paper tray is empty. Load paper in the paper tray and press the
PRINT/RESET button {< 5 seconds).
Left cover is open. Close the left cover.
RAM overflow or overrun has
occured.
Press the PRINT/RESET button (< 5 seconds).
□ □
\ 1
У
□
Toner may be empty. Refill the toner orshake the Process Unit( P.58).
□ □
*1
■
Toner may be empty and the life
cycle of the Process Unit has
expired.
Install a new Process Unit when the toner supply is
depleted.
□ □
М/ *2
■
The life cycle of the Process Unit
has expired.
V 1 /
■
□
■
Process Unit is not installed. Install the Process Unit ( P. 13).
■
*3
□ □
Internal errors. If the ERROR indicator is lit, turn the power off for a
few seconds then on again.
If the error continues, service by an Authorized
Panasonic Service Center is required.
■ : on : blinking (fast - with an interval of about 1 second)
□ : off : blinking (slow - with an interval of about 2.5 seconds)
You still can refill the toner, but it is recommended that you replace the Process Unit as soon as possible
to maintain maximum print quality.
*2 You can print additional pages until the toner supply is depleted, but it is recommended that you replace
the Process Unit as soon as possible to maintain maximum print quality.
Varies depending on the condition.
56