Allocating virtual memory, For windows 3.1 or windows for workgroups 3.11, For windows 95 – Panasonic KX-P6500 User Manual
Page 19: Using the printer in windows, Chapter 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Chapter 3
Using the Printer in Windows
Allocating Virtual Memory
For Windows 3.1 or Windows for Workgroups 3.11
jhe KX-P6500 for Workgroups software requires a minimum of 12 MB of virtual memory for Personal, Client and Server
configurations.
To change the virtual memory, follow the instructions below. For more information on virtual memory, refer to the
Optimizing Windows section in the Microsoft Windows 3.1 User’s Guide.
1 Double click the
Main
icon from the
Program Manager screen.
Double click the
Control Panel
icon.
Double click the
386 Enhanced
icon.
^ Click Virtual Memory
C If the size shown in the Virtual Memory dialog
box is less than 12,000 KB, then click
I
Change (.
Otherwise click
\
Cancel
to exit the dialog box.
0 Select the Type “Permanent” in the New
Swapfile Settings box.
7 Increase the New size in the New Swapfile
Settings box to at least 12,000 KB.
Note;
• If you cannot increase the New size to
the desired figure, then select the Type
“Temporary"
and
set
the
virtual
memory size.
g Click [ж].
Click Yes .
10
Click
I
Restart Windows | to make the setting
effective.
о
о
D)
(Q
<
Д
c
m
(D
3
о
For Windows 95
It is recommended that you let Windows manage your virtual memory. However, if you need to manually increase the
virtual memory, follow the instructions below.
1
Click the Start | button, move the pointer to
“Settings” and click “Control Panel”.
2
Double click the
System
icon.
“System Properties” window will be displayed.
Click the “Performance” tab.
4
1 Virtual Memory... |.
0
Click “Let me specify my own virtual memory
settings” button.
0
Increase the Minimum setting to at least 12.
10
У Click
I
OK
I.
0 Click
I
Yes
I
.
0 Click fClose ].
Click Yes to restart Windows.
19