Panasonic KX-P6500 - Manual (Page 62)

Appendix
Types of Paper to Avoid
□
• Extremely smooth or shiny paper or paper that is highly textured
• Coated papers
• Letterhead imprinted with low temperature or thermography. These materials may transfer onto the fusing
roller and cause damage. Any pre-printed paper should use inks compatible with 200°C (392T) for 0.1 second.
• Damaged or wrinkled paper, or paper with irregularities such as tabs, staples, etc.
• Multipart forms or carbonless paper
• Paper with a cotton and/or fibre content over 25%
Two-Sided Printing
Two-sided printing is possible. However, you should not expect the same print quality and reliability that you get with
one-sided printing. We strongly recommend that you follow the guidelines below.
• Use 75 to 90 g/m^ (20 to 24 lbs.) paper. [Do not use 60 g/m^ (16 lbs.) paper.]
• Do not load more than 50 sheets In the paper tray.
• Before loading paper in the tray, adjust it so that the edges are even.
Transparencies and Labels
You may also print on labels and transparencies that are made for the printer. Panasonic has tested and found that
the following work satisfactorily.
OHP 3M154, 3M688, 3M688C, SCOTCH8803, 1 Note:
transparencies 3M/SCOTCH-CG3300, 3M PP2500 1 • With any label stock, the labels
Labels AVERY 5160, AVERY 5162
j must completely cover the back-
1 ing material. ( f i g u r e below)
Avery Copier Labels (70 x 36 mm)
Avery White (105 x 37 mm) 16 labels per sheet
COPY TACKC-16, C-24
ESSELTE DATALINE,
ESSELTE KOPIETIKETTER
15914, 15917, 15920, 15922
FASTONALL COPY-LINE
' 18-030, 18-033, 18-034, 18-035, 18-036, 18-037
HERMA Copy-print 4455, 4464
YES NO
Labels cover the entire
backing material
The backing material is exposed.
62