Printer specifications, Printing method, Resoiution – Panasonic KX-P6500 User Manual
Page 60: Paper feed, Paper output, Power source, Software emulation, Fonts, Ram buffer, Interface
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Appendix
Printer Specifications
Printing Method:
Semiconductor Laser
Print Speed:
6 pages per minute (ppm) maximum {Letter size paper,
text mode, 5% image area, all originals)
Resoiution:
600 dots per inch (dpi) [when GDI mode] and 300 dpi
[when PCL mode]
Paper Feed:
1 Multi-purpose tray up to 100 sheets [75 g/m^ (20 lbs.)]
Paper Output:
Up to 50 sheets
Power Source:
Refer to the nameplate on the rear of the unit
Software Emulation :
HP LaserJet Series IIP
Fonts;
GDI mode:
(TrueType fonts in Windows)
PCL mode:
Courier 10 point, 12 pitch: Regular, Bold, Italic
Courier 12 point, 10 pitch: Regular, Bold, Italic
Line Printer 8.5 point, 16.66 pitch: Regular
RAM Buffer:
512 KB (expandable to a maximum of 1.5 MB with optional
1 MB RAM Board, 2.5 MB with 2 MB RAM Board and 4.5
MB with optional 4 MB RAM Board.)
Interface:
Bidirectional parallel (IEEE P1284)
Operating Environment:
10 to 32.5*C{50 to 90.5T]
20 to 80% RH
Storage Environment:
Oto 35’C (32 to 95*F}
10 to 80% RH
Dimensions:
132 (W)
X
378 (D)
X
287 (H) mm {5.2"
x
14.9"
x
11.3"}
Mass (Weight):
Approx. 6.5 kg {14.4 lbs.}
Consumables/Life:
Starter toner
1
_000 pages average (4% image area
with repetitive printing of 10 pages)
Toner cartridge: 2,000 pages average (4% image area
with repetitive printing of 10 pages)
Process unit; 15,000 pages average (4% image area
with repetitive printing of 10 pages)
4% image area means that the black area within the
printing area is 4%. Printing 8% image area continuously
will reduce the life of the toner and of the Process Unit to
about half as compared to printing 4% image area. The
‘Toner Saving Mode” allows you to save the toner and to
maintain the life of the Process Unit (P. 32, 50).
Power Consumption:
480 W TYPICAL (Printing with Fuser on)
9 W TYPICAL (Power Saving Mode)
Noise Level:
Printing: 45 dBA
Standby: Background noise level
CPU:
Motorola MC68EC000 (16MHz)
Power Saving Mode:
To conserve energy and reduce operating cost, this printer
is provided with a power save feature. If the printer has not
received data for 15 minutes, the printer will automatically
enter a power saving mode.
Emulation means to operate like another printer.
*2 This toner is installed in the Process Unit at the factory before shipment of the printer.
60