Yamaha HTR-5835 - Manual (Page 10)

CONTROLS AND FUNCTIONS
Remote control
This section describes the function of each control on the
remote control used to control this unit. To operate other
components, see “REMOTE C'ONTROL FEATURES" on
page 60.
#
#
1 Infrared window
Outputs infrared control signals. Aim this window at the
component you want to operate.
2 Input selector buttons
Select the input source and change the control area.
3 Sound field program/numeric buttons
Use to select sound field programs.
Use numbers I through
8 to select preset stations when the
unit is in tuner mode.
Use SELECT to playback 2-channel sources in surround
(see page 28).
Use EXTD SUR. to turn on/off the extended surround
modes (see page 27).
Use DIRECT ST. to playback 2-channel sources in high
fidelity sound (see page 29).
4. SPEAKERS A/B
Use to turn on or off the set of front speakers connected to
the A and, or B terminals on the rear panel each time the
corresponding button is pressed.
5 LEVEL, BAND
Selects the speaker channel to be adjusted and sets the
level.
Switches the reeeption band when the unit is in tuner
mode.
6 Cursor buttons u / d / j / i /ENTER
Use to select and adjust sound field program parameters or
SET MENU items.
Press j i to select a preset station group (A to E) w'hen
the unit is in tuner mode.
Press
u d to select a preset station number (I to 8 )
w'hen the unit is in tuner mode.
7 RETURN, MEMORY*
Returns to the previous menu level when adjusting the
SET MENU parameters.
8 STANDBY
Sets this unit ill the standby mode.
8 SYSTEM POWER
Turns on the pow'er of this unit.
O SLEEP
Sets the sleep timer.
A MULTI CH IN
Selects multi-channel input when using an external
decoder (etc.).
B CODE SET
Use to set up remote control codes (see page 61).