Resetting all parameters to the factory presets – Yamaha HTR-5835 User Manual
Page 68
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
EDITING SOUND FIELD PARAMETERS
3
Repeat steps 2 through 4 as necessary to
change other program parameters.
Note
You cannot change parameter values when “MEMORY
GUARD”
IS
set to ON. If you want to change the parameter
values, set “MEMORY GUARD” to OFF (see page 58).
Memory back-up
The memory back-up circuit prev'ents the stored data
from being lost even if this unit is set in the standby
mode, the power cord is disconnected from the AC
outlet, or the power supply is temporarily cut due to
power failure. However, if the power is cut for more
than one tveek, the parameter values will return to the
factory settings. If this happens, edit the parameter
v'alue again.
■ Resetting all parameters to the factory
presets
Use PARAM. INI (see page 58).
64