A/ofes, Displaying information about the input source, 1 select the input source – Yamaha HTR-5835 User Manual
Page 35: Straight
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PLAYBACK
A/ofes:
• WTien playing a DTS-CD/LD. be sure to set the INPUT MODE
to DTS.
• If the digital output data of the player has been processed in any
way you may not be able to perfomi DTS decoding even if you
make a digital connection between this unit and the player
depending on the player
■ Displaying information about the input
source
You can display the type, fomiat and sampling fretjuency
of the current input signal.
1
Select the input source.
Press u / d to display the following
information about the input signal.
!'■ ...................:
2
Press AMP to select the AMP mode, then
press STRAIGHT so that “STRAIGHT”
appears in the display.
then
(Format)
i n
fs
rate
fig
Signal format display. When the unit
cannot detect a digital signal it
automatically switches to analog input.
Number of source channels in the input
signal. For example, a multi-channel
soundtrack with 3 front channels, 2
sun'ound channels and LFE, is
displayed as “3/2/LFE”.
Sampling frequency. When the unit is
unable to detect the sampling
frequency “Unknown” appears.
Bit rate. When the unit is unable to
detect the bit rate “Unknown” appears.
Flag data encoded with DTS or Dolby
Digital signals that cue this unit to
automatically switch decoders.
♦
STRAIGHT
31