Connecting the ac power cord, Ac outlet(s) (switched) 2 outlets, Memory back-up – Yamaha HTR-5835 User Manual
Page 24: Connecting the power supply cord
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CONNECTIONS
Connecting the power supply cord Turning on the power
■ Connecting the AC power cord
Plug the power eord into an AC wall outlet.
■ AC OUTLET(S) (SWITCHED)........... 2 outlets
Use these outlets to connect the powder cords from your
other components to this unit. Power to the AC
OUTLET(S) is controlled by this unit’s STANDBY 'ON
(or SYSTEM POWER and STANDBY). The outlet(s)
supply power to any connected component tvhenever this
unit is turned on. The maximum pow-er (total pow-er
consumption of components) that can be connected to the
AC OUTLET(S) IS 100 W.
■ Memory back-up
The memory back-up circuit prevents the stored data from
being lost even if this unit is in the standby mode.
However if the pow er cord is disconnected from the AC
w'all outlet, or the power supply is cut for more than one
week, the stored data w'ill be lost.
When ail connections are complete, turn on the pow'er of
this unit.
(U.S.A. model)
j -n ...J l_
SYSTEM POWER
. ■
ij
—
Press STANDBY/ON (or SYSTEM POWER on the
remote control) to turn on the power of this unit.
Remote control
20