7 press d to display the speakers parameter, 11 press enter to confirm your selection, Speakers spk – Yamaha HTR-5835 User Manual
Page 26: 9 press d to display set/cancel, Check:testtone, Check ok? yes, 12 press j / i to select the desired setting, 13 press enter to confirm your selection, 10 press j / i to select the desired setting, Set cancel
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
BASIC SETUP
7
Press
d
to display the SPEAKERS
parameter.
11
Press ENTER to confirm your selection.
8
Press j / i to select the number of speakers
you connected.
SPEAKERS--5spk
Choices
Display
Speakers
2
spk
[U SI
Front L/R
3spk
[yic] s
Front L/R, Center
4spk
iJL.|
^
:
sb
I
Front L/R, Surround L/R
5spk
L C R|
E! ;Sgl
Front L/R, CenteiT SmToimd L/R
9
Press
d
to display SET/CANCEL.
If you selected SET, you hear a test tone from each
speaker in turn. “CHECK:TestTone” appears in the
trout panel display for a few seconds, then “CHECK:
OK'i’”.
CHECK:TestTone
♦
CHECK OK? YES
12
Press j / i to select the desired setting.
CHECK OK? YES
YES
To complete the setup process if the test tone
levels from each speaker were satisfactory.
NO
To proceed to the SP LEVEL speaker level
adjustment menu to balance the level of each
speaker.
13
Press ENTER to confirm your selection.
10
Press j / i to select the desired setting.
>SET CANCEL
If you selected NO in step 12, the front speaker level
adjustment display appears in the front panel display.
SET
To apply the settings you chose in steps
4 through
8
.
CANCEL To cancel the setup without making
any changes.
22