Using set menu, Ta 3.7, 6 press enter to enter the displayed menu – Yamaha HTR-5835 User Manual
Page 58: 8 to exit, press set menu when finished, 1 press amp, 2 press set menu, 3 press u / d to display manual setup, Manual setup, 4 press enter to enter manual setup, 1 sound menu
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SET MENU
Using SET MENU
Use the remote control to access and adjust each
parameter.
■ '2,8
............'uj.Mi
ta
3.7
6
Press ENTER to enter the displayed menu.
Repeat steps 5 and 6 to navigate to and enter the
items you want to adjust.
To return to the previous menu level, press RETURN.
7
Press
u / d
to select the item you want to
adjust, then press
j
/ i to change the setting
of the item.
Repeat this operation to select and adjust each setting.
To return to the previous menu level, press RETURN.
8
To exit, press SET MENU when finished.
y
You can change SET MENU parameters while the unit is
reproducing sound.
Noté
:
You cannot change some SET MENU parameters while the unit
IS in either cinema or music night listening mode.
1
Press AMP.
Memory back-up
The memory back-up circuit prevents the stored data
from being lost even if this unit is in the standby mode.
However, if the power cord is disconnected from the
AC outlet, or the power supply is cut for more than one
week, the stored data will be lost. If so, adjust the
items again.
2
Press SET MENU.
“BASIC SETUP’’ appears in the front panel display.
3
Press u /
d
to display MANUAL SETUP.
MANUAL SETUP
4
Press ENTER to enter MANUAL SETUP.
1 SOUND MENU appears in the trout panel display.
1 SOUND MENU
5
Press u /
d
to display the desired menu.
1 SOUND MENU ^
2 INPUT MENU
I
3 OPTION MENU
54