Note, How to connect the serial terminal – Panasonic PT 37P1 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connections
How to connect the AV Output Terminal to other equipment
The video output terminal outputs the signals which are input to the video input terminal.
Monitor
Note:
(1) The video output terminal can only output the identical signal to that which is input to the video input terminal.
(2) Additional equipment and cables shown are not supplied with this set.
How to connect the SERIAL Terminal
The SERIAL terminal is used when the Wide Plasma Display is controlled by a computer.
COMPUTER
TUNER IN
REMOTE
f qpooqpopoooo \
ly (pooooooooooooj lyj
^(v:vX)@ (o)
PC IN
SEF :IAL
RS-232C conversion cable{optional accessory)
/
z|
I—
D-SUB 9pin
Note:
(1) Use the TY-SCP02RS1U RS-232C conversion cable (optional accessory) to connect the computer to the Wide
Plasma Display.
(2) Refer to page 32 for details of the control method for the Wide Plasma Display.
(3) The computer shown is for example purposes only.
(4) Additional equipment and cables shown are not supplied with this set.
17