Panasonic PT 37P1 - Manual (Page 29)

Signal Menu
1 .Push the “Menu” Button.
MENU
□
1,2
ACTION
During “AV(S-Video)” input
signal mode
2.Select the “Signal” Menu by pushing the
Position Up “A”or Down Button and
Access the “Signal” Menu by pushing the
“ACTION” Button.
S.Select the required mode by pushing the
Position Up
"A”
or Down buttons, and J r-^ r-^
set the appropriate function by the Position ----- ------
Left or Right buttons.
Note:
(1) The “Signal” screen changes depending on the input signal mode {AV(S-Video), Component, RGB or PC).
During “AV(S-Video)” input signal mode
Select the mode
Select the function I
4
I I ► I
S'Snal SScB-ch-n,.
Scan mode
Field
3
Mode Function
Colour system Set the color system to match the input signal. If set to “Auto”, the color system is determined
automatically.
Note:
(1 )The display color for the input signal mode (“AV”) changes
according to the color system
—^ Auto ^^ NTSC ^
->SECAM<->PAL^
setting.
Auto - Green
NTSC - Magenta
PAL - Yellow
SECAM - Cyan
Scan mode __ >Fjeid<__ watching a normal image, select the “Field”.
I I If the recording mode used for a device such as a digital video camera is
> rame< “Frame”, select the “Frame” to obtain a higher-quality playback image.
During “Component” input signal mode
Select a] [E
Signal
“ or CD CB-ChonB»
Colour matrix
Mode Function
Colour matrix If the output signals from the source connected to the COMPONENT/RGB input terminals are
in 525p (480p) format, the colors in the images from this source will be set to their natural
colors.
29