Panasonic PT 37P1 - Manual (Page 27)

Picture Menu
1. Use the Position Up “A” or Down
buttons to select the “Manual W/B” menu
from the “Picture” menu, and then use the [ w \
Position Right button to select “On”.
2. Press the Position Down button.
(The “Manual W/B” menu screen will then j
be displayed.)
3.Select the required function by pushing the
Position Up “A” or Down “▼’’buttons, and }~ a | ___
access and alter the setting by pushing the
Position Left or Right buttons. -------------------------
1,2
Piotllfp rii^iuje mocB-Ac*iin
CP s#»d
I Piet urs Mode 1 Di/nemic 1 1
Icolouf Oazlil
I Tin!
I Bright rwM
I Contrast
¡Sharpness F o I f — ^^1
I White balance n Warm Tj
1 Manual W/D
M£.MU
CJE j (I
W/B High 6
W/B Low R
Item Effect Adjustment range Details
W/B High R 4 ►
Less More
-30 - 30 Adjusts the white balance for light red areas.
W/B High B ◄ ►
Less More
-30 - 30 Adjusts the white balance for light blue areas.
W/B Low R ◄ ►
Less More
-30 - 30 Adjusts the white balance for dark red areas.
W/B Low B ◄ ►
Less More
-30 - 30 Adjusts the white balance for dark blue areas.
Note:
(1) Carry out “W/B” adjustment as follows.
(T) Adjust the white balance of the bright sections using the “W/B High R” and “W/B High B” settings,
d) Adjust the white balance of the dark sections using the “W/B Low R” and “W/B Low B” settings.
(D Repeat steps 0 and (2) to adjust.
Steps 0 and 0 affect each other’s settings, so repeat each step in turn to make the adjustment.
(2) The adjusted values are memorized separately for each Picture Mode (Normal/Dynamic).
(3) The adjustment range values should be used as an adjustment reference.
Helpful Hint ([^Normalization)
If the N button on the remote control unit is pressed when the “Manual W/B” menu is displayed, all adjustment values
will be returned to the factory setting level.
27